HDMI display resolutions
Display Mode Horz freq (kHz) Vert freq (Hz)
1920 × 1080p @ 50 56.25 50
1920 × 1080p @ 60 67.5 60
3840 × 2160p @ 24 53.5 24
3840 × 2160p @ 25 56.3 25
3840 × 2160p @ 30 67.5 30
3840 × 2160p @ 50 112.5 50
3840 × 2160p @ 60 135 60
DisplayPort display resolutions
Display Mode Horz freq (kHz) Vert freq (Hz)
VESA 640 × 480 31.47 60
VESA 800 × 600 37.88 60
VESA 1024 × 768 48.36 60
3840 × 2160 @ 24 52.4 24
3840 × 2160 @ 30 65.7 30
3840 × 2160 @ 60 133.3 60
3840 × 2160 @ 82 181.7 82
3840 × 2160 @ 98 218 98
3840 × 2160 @ 120 268.6 120
3840 × 2160 @ 144 323.9 144
Energy saver feature
The monitor supports a reduced power state. The reduced power state will be initiated if the monitor detects
the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the absence of
these signals, the monitor screen is blanked, the backlight is turned o, and the power light turns amber.
When the monitor is in the reduced power state, the monitor will utilize <0.5 watts of power. There is a brief
warm-up period before the monitor returns to its normal operating state.
Refer to the computer manual for instructions on setting the energy saver mode (sometimes called power
management feature).
NOTE: The above energy saver feature works only when the monitor is connected to a computer that has
energy saver features.
By selecting the settings in the monitor's Sleep Timer utility, you can also program the monitor to enter into
the reduced power state at a predetermined time. When the monitor's Sleep Timer utility initiates the reduced
power state, the power light blinks amber.
Energy saver feature 21
To Next Page
Loading...
