HP P22 G5

3
) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component
HDMI connector P200
P22/P22h/P24/P24h/P27h G5
Repair the HDMI connector:
1) Use a soldering iron and a disordering pump to remove as much solder as possible from the pin.
2
) Use a soldering iron or hot air gun to melt the solder on the pins.
3
) Lift the P200 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.
P32u G5
Repair the HDMI connector:
1) Use a soldering iron and a disordering pump to remove as much solder as possible from the pin.
2
) Use a soldering iron or hot air gun to melt the solder on the pins.