To Next Page

To Previous Page

Inserting a PC Card

CAUTION: To prevent damage to the computer and external media cards, do not insert an

ExpressCard into a PC Card slot.

CAUTION: To reduce the risk of damage to the connectors:

Use minimal force when inserting a PC Card.

Do not move or transport the computer when a PC Card is in use.

The PC Card slot may contain a protective insert. The insert must be removed before you can insert a

PC Card:

1. Press the PC Card eject button (1).

This action extends the button into position for releasing the insert.

2. Press the PC Card eject button again to release the insert.

3. Pull the insert out of the slot (2).

To insert a PC Card:

1. Hold the card label-side up, with the connectors facing the computer.

2. Insert the card into the PC Card slot, and then press in on the card until it is firmly seated.

You will hear a sound when the card has been detected, and a menu of available options may be

displayed.

NOTE: The first time you connect a PC Card, a message in the notification area lets you know

that the device is recognized by the computer.

NOTE: To conserve power, stop or remove a PC Card when it is not in use.

34 Chapter 5 External cards and devices

HP ProBook 4525s - Notebook PC Specifications

General

Chipset	AMD M880G
Memory	Up to 8 GB DDR3
Graphics	ATI Mobility Radeon HD 4250
Operating System	Windows 7 Professional
Wireless	802.11b/g/n
Webcam	2 MP webcam
Processor	AMD Turion II Dual-Core Mobile Processor, AMD Athlon II Dual-Core Processor
Display	15.6-inch diagonal LED-backlit HD anti-glare
Storage	320 GB
Optical Drive	DVD+/-RW SuperMulti DL LightScribe
Battery	6-cell Lithium-Ion
Bluetooth	Yes
Audio	Integrated stereo speakers
Ports	3 USB 2.0