HP ProBook 4525s - Notebook PC Reference Guide

Inserting an optical disc
Tray load
1. Turn on the computer.
2. Press the release button (1) on the drive bezel to release the disc tray.
3. Pull out the tray (2).
4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.
NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6. Close the disc tray.
NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, an
AutoPlay dialog box opens. It prompts you to select how you want to use the media content.
Slot load
CAUTION: Do not insert 8-cm optical discs into a slot load optical drive. It may cause damage to the
optical drive.
1. Turn on the computer.
2. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up.
Using optical drives (select models only) 49

HP ProBook 4525s - Notebook PC Specifications

General

Chipset	AMD M880G
Memory	Up to 8 GB DDR3
Graphics	ATI Mobility Radeon HD 4250
Operating System	Windows 7 Professional
Wireless	802.11b/g/n
Webcam	2 MP webcam
Processor	AMD Turion II Dual-Core Mobile Processor, AMD Athlon II Dual-Core Processor
Display	15.6-inch diagonal LED-backlit HD anti-glare
Storage	320 GB
Optical Drive	DVD+/-RW SuperMulti DL LightScribe
Battery	6-cell Lithium-Ion
Bluetooth	Yes
Audio	Integrated stereo speakers
Ports	3 USB 2.0