To Next Page

To Previous Page

1-2

Introducing the Switch

These switches are designed to be used primarily as a high-density wiring

closet or desktop switch. These switches can directly connect computers,

printers, and servers to provide dedicated bandwidth to those devices, and

can build a switched network infrastructure by connecting the switch to hubs,

other switches, or routers. In addition, the Switch 2510G Series devices offer

full network management capabilities.

This chapter describes the ProCurve Switch 2510G-24 and Switch

2510G-48, including:

■ front and back of the switches

■ LEDs

■ switch features

Other manuals for HP ProCurve 2510G Series

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510G Series and is the answer not in the manual?

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)