HP ProCurve 2510G Series Installation And Getting Started Guide

1-1
Introducing the Switch
1
Introducing the Switch
The ProCurve Switch 2510G-24 and Switch 2510G-48 are multiport Gigabit
switches ideal for building high-performance small business networks. These
switches are store-and-forward devices offering low latency for high-speed
networking.
The Switch 2510G-24 and Switch 2510G-48 have, respectively, 24 or 48 auto-
sensing 10/100/1000Base-T RJ-45 ports, four dual-personality ports—either
auto-sensing 10/100/1000Base-T RJ-45 or mini-GBIC.
The dual-personality ports have either auto-sensing 10/100/1000Base-T RJ-45,
or mini-GBIC (SFP, small form factor pluggable) connectivity. If any of the
mini-GBIC ports are used the corresponding RJ-45 port will be disabled.
ProCurve Switch 2510G-24 (J9279A)
ProCurve Switch 2510G-48 (J9280A)

HP ProCurve 2510G Series Specifications

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)