HP ProCurve 2510G Series Installation And Getting Started Guide

A-1
Switch Specifications
A
Switch Specifications
Physical
Electrical
The switch automatically adjusts to any voltage between 100-240 volts and
either 50 or 60 Hz.
Environmental
2510G-24 (J9279A) 2510G-48 (J9280A)
Width: 44.3 cm (17.42 in) 44.3 cm (17.42 in)
Depth: 32.3 cm (12.7 in) 33.3 cm (12.7 in)
Height: 4.4 cm (1.73 in) 4.4 cm (1.73 in)
Weight: 3.3 kg (7.2 lbs) 3.9 kg (8.6 lbs)
2510G-24 (J9279A) 2510G-48 (J9280A)
AC voltage: 100-240 volts 100-240 volts
Maximum current: 1.0 A 1.5 A
Frequency range: 50-60 Hz 50/60 Hz
Operating Non-Operating
Temperature: 0°C to 45°C (32°F to 113°F) -40°C to 70°C (-40°F to 158°F)
Relative humidity:
(non-condensing)
15% to 95% at 40°C (104°F) 15% to 90% at 65°C (149°F)
Maximum altitude: 3.5 Km (10,000 ft) 4.6 Km (15,000 ft)

HP ProCurve 2510G Series Specifications

General

Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Manageable	Yes
Storage Temperature	-40°C to 70°C
Ports	24 x 10/100/1000 ports
Memory	128 MB
Jumbo Frame Support	Yes
Layer	Layer 2
Features	VLAN, QoS, ACLs, IGMP snooping
Management	Web interface, CLI, SNMP
Security Features	RADIUS, TACACS+
Power Supply	Internal power supply
Operating Temperature	0°C to 45°C
Power over Ethernet (PoE)	Optional (PoE models available)