2-13
Installing the Switch
Installation Procedures
Installing the Switch
Wall Mounting
Caution The J9279A 24-port switch can be wall mounted with the RJ-45 port side facing
down only in the horizontal orientation. A vertical wall mount orientation is
not supported.
The J9280A 48-port switch can be wall mounted with either the RJ-45 ports
side up or down in the horizontal orientation. A vertical wall mount orientation
is not supported.
1. Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 8-mm M4 screws.
2. Attach the switch to the wall or wood surface with two 5/8-inch number
12 wood screws (not included).
Figure 2-8. Example of wall mounting the Switch 2510G-48
Wall
5/8-inch
wood screws
M4 screws
RJ-45 Ports
To Next Page
Loading...
