2-1
Installing the Switch
2
Installing the Switch
The ProCurve Switch 2510G Series devices are easy to install. They come with
an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack, in an equipment cabinet, and with rubber feet that
can be attached so the switch can be securely located on a horizontal surface.
The brackets are designed to allow mounting the switch in a variety of
locations and orientations. This chapter shows how to install the switch.
Included Parts
The Switch 2510G Series devices have the following components shipped with
them:
■ ProCurve Switch 2510G Series Installation and Getting Started Guide,
this manual
■ Read Me First
■ Console cable (5188-3836)
■ Customer Support/Warranty booklet
■ Accessory kit
(
5069-6535)
two mounting brackets
four 8-mm M4 screws to attach the
mounting brackets to the switch
four 5/8-inch number 12-24 screws to attach
the switch to a rack
four rubber feet
To Next Page
Loading...
Need help?
General
