Need help?Do you have a question about the HP ProCurve 2910al Series and is the answer not in the manual?
Overview of the auto-sensing 10/100/1000Base-T RJ-45 and dual-personality ports.
Important safety and environmental precautions to follow before and during switch installation.
A step-by-step summary of the entire switch installation process.
Ensuring the physical environment is prepared and the installation location is appropriate.
How to check front panel LEDs for successful switch self-test after powering on.
Instructions for mounting the switch in a rack, cabinet, or on a horizontal surface.
How to connect the switch to a power source using the provided power cord.
Steps for connecting a console for direct management and initial configuration.
Instructions for connecting network cables to the switch ports using RJ-45 or mini-GBICs.
Guidance on the minimum configuration required for switch management and network compatibility.
Step-by-step instructions for using the console setup screen for initial switch configuration.
Initial checks and common solutions for network and switch operational problems.
Interpreting switch and module LED patterns to identify and diagnose problems.
Overview of the auto-sensing 10/100/1000Base-T RJ-45 and dual-personality ports.
Important safety and environmental precautions to follow before and during switch installation.
A step-by-step summary of the entire switch installation process.
Ensuring the physical environment is prepared and the installation location is appropriate.
How to check front panel LEDs for successful switch self-test after powering on.
Instructions for mounting the switch in a rack, cabinet, or on a horizontal surface.
How to connect the switch to a power source using the provided power cord.
Steps for connecting a console for direct management and initial configuration.
Instructions for connecting network cables to the switch ports using RJ-45 or mini-GBICs.
Guidance on the minimum configuration required for switch management and network compatibility.
Step-by-step instructions for using the console setup screen for initial switch configuration.
Initial checks and common solutions for network and switch operational problems.
Interpreting switch and module LED patterns to identify and diagnose problems.
To Next Page
General