HP ProCurve 2910al Series User Manual

A-2
Switch Specifications
Switch Specifications
Acoustic
ProCurve Switch 2910al-24G (J9145A)
Geraeuschemission LpA=41.1 dB am fiktiven Arbeitsplatz nach
DIN 45635 T.19
Noise Emission LpA=41.1 dB at virtual workspace according to
DIN 45635 T.19
ProCurve Switch 2910al-48G (J9147A)
Geraeuschemission LpA=41.1 dB am fiktiven Arbeitsplatz nach
DIN 45635 T.19
Noise Emission LpA=41.1 dB at virtual workspace according to
DIN 45635 T.19
ProCurve Switch 2910al-24G-PoE+ (J9146A)
Geraeuschemission LpA=39.5 dB am fiktiven Arbeitsplatz nach
DIN 45635 T.19
Noise Emission LpA=39.5 dB at virtual workspace according to
DIN 45635 T.19
ProCurve Switch 2910al-48G-PoE+ (J9148A)
Geraeuschemission LpA=41.1 dB am fiktiven Arbeitsplatz nach
DIN 45635 T.19
Noise Emission LpA=41.1 dB at virtual workspace according to
DIN 45635 T.19
Safety
Complies with:
■ EN60950
■ CSA 22.2 No. 60950
■ UL 60950
■ IEC 60950

HP ProCurve 2910al Series Specifications

General

Model	HP ProCurve 2910al Series
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 3
Form Factor	Rack-mountable, 1U
Layer 3 Routing	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Power over Ethernet (PoE)	Available on PoE+ models (2910al-24G-PoE+ and 2910al-48G-PoE+)
Management	Web, SNMP, CLI
MAC Address Table Size	16, 000 entries
Routing Protocol	RIP
Power Supply	Internal power supply (AC)
Jumbo Frame Support	Yes (up to 9220 bytes)
Weight	4.9 kg
Power Consumption	Varies by model (typically 30-60W)
Operating Temperature	0°C to 45°C
VLAN Support	Yes (up to 512 VLANs)