Need help?Do you have a question about the HP ProCurve 2910al Series and is the answer not in the manual?
General| Model | HP ProCurve 2910al Series |
|---|---|
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Layer | Layer 3 |
| Form Factor | Rack-mountable, 1U |
| Layer 3 Routing | Yes |
| Operating Humidity | 15% to 95% non-condensing |
| Ports | 24 or 48 10/100/1000 ports |
| Uplink Ports | 4 SFP (mini-GBIC) slots |
| Power over Ethernet (PoE) | Available on PoE+ models (2910al-24G-PoE+ and 2910al-48G-PoE+) |
| Management | Web, SNMP, CLI |
| MAC Address Table Size | 16, 000 entries |
| Routing Protocol | RIP |
| Power Supply | Internal power supply (AC) |
| Jumbo Frame Support | Yes (up to 9220 bytes) |
| Weight | 4.9 kg |
| Power Consumption | Varies by model (typically 30-60W) |
| Operating Temperature | 0°C to 45°C |
| VLAN Support | Yes (up to 512 VLANs) |
To Next Page