HP ProCurve 2910al Series User Manual

1-17
Introducing the Switch
Switch Features
Introducing the Switch
■ Support for the Spanning Tree Protocol to eliminate network loops
■ Support for up to 256 IEEE 802.1Q-compliant VLANs so you can divide
the attached end nodes into logical groupings that fit your business needs.
■ Support for many advanced features to enhance network performance—
for a description, see the Management and Configuration Guide, which
is on the ProCurve Web site www.procurve.com/manuals.
■ Download of new switch software for product enhancements or bug fixes.
■ Support for IEEE 802.3af and 802.3at draft standard and Pre-standard PoE
and PoE+ devices.
■ Support for SFP+ transceivers at 10-GbE speed.

HP ProCurve 2910al Series Specifications

General

Model	HP ProCurve 2910al Series
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 3
Form Factor	Rack-mountable, 1U
Layer 3 Routing	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Power over Ethernet (PoE)	Available on PoE+ models (2910al-24G-PoE+ and 2910al-48G-PoE+)
Management	Web, SNMP, CLI
MAC Address Table Size	16, 000 entries
Routing Protocol	RIP
Power Supply	Internal power supply (AC)
Jumbo Frame Support	Yes (up to 9220 bytes)
Weight	4.9 kg
Power Consumption	Varies by model (typically 30-60W)
Operating Temperature	0°C to 45°C
VLAN Support	Yes (up to 512 VLANs)