HP ProCurve 2910al Series User Manual

2-2
Installing the Switch
Included Parts
Installing the Switch
■ Accessory kit
■ Power cord, one of the following:
Japan Power
Cord Warning
(5069-5705)
two mounting brackets
eight 8-mm M4 screws to attach the
mounting brackets to the switch
four 5/8-inch number 12-24 screws to
attach the switch to a rack
four rubber feet
Non-PoE Switches PoE+ Switches
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
South Africa and India
Thailand and Brazil
Taiwan
Israel
United States/Canada/Mexico
8121-0828
8121-0829
8120-0823
8120-0826
8120-4753
8120-0827
8120-0824
8120-0919
8121-0673
8121-0965
8121-1035
8121-0822
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
South Africa and India
Thailand and Brazil
Taiwan
Israel
United States/Canada/Mexico
8121-0857
8121-1034
8120-5336
8120-5340
8120-5342
8120-5339
8120-5334
8120-5341
8121-0671
8121-0967
8121-1009
8121-0973

HP ProCurve 2910al Series Specifications

General

Model	HP ProCurve 2910al Series
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 3
Form Factor	Rack-mountable, 1U
Layer 3 Routing	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 SFP (mini-GBIC) slots
Power over Ethernet (PoE)	Available on PoE+ models (2910al-24G-PoE+ and 2910al-48G-PoE+)
Management	Web, SNMP, CLI
MAC Address Table Size	16, 000 entries
Routing Protocol	RIP
Power Supply	Internal power supply (AC)
Jumbo Frame Support	Yes (up to 9220 bytes)
Weight	4.9 kg
Power Consumption	Varies by model (typically 30-60W)
Operating Temperature	0°C to 45°C
VLAN Support	Yes (up to 512 VLANs)