HP ProCurve 3500yl - Copy Command with Show Tech Option

93
Enhancements
Release K.13.04 Enhancements
Figure 19. Example of the show vrrp Command with Statistics
■ Enhancement (PR_ 0000000420) — This enhancement provides the show-tech option for
customizing copy tftp output.
Copy Command with Show Tech Option
This enhancement allows the show-tech command to execute a series of commands found in a special
file stored in flash. If no file is found, the current hard-coded list is used. This feature provides the
ability to customize the output.
To upload the customized list, the copy tftp command will include the show-tech option in the
destination parameter.
Syntax: copy <source> <destination> [options]
Copy data files to or from the switch.
ProCurve(config)# show vrrp
VRRP Global Statistics Information
VRRP Enabled : Yes
Protocol Version : 2
Invalid VRID Pkts Rx : 0
Checksum Error Pkts Rx : 0
Bad Version Pkts Rx : 0
VRRP Virtual Router Statistics Information
Vlan ID : 22
Virtual Router ID : 1
State : Initialize
Up Time : 64 mins
Virtual MAC Address : 00005e-000101
Master's IP Address :
Associated IP Addr Count : 1 Near Failovers : 0
Advertise Pkts Rx : 0 Become Master : 0
Zero Priority Rx : 0 Zero Priority Tx : 0
Bad Length Pkts : 0 Bad Type Pkts : 0
Mismatched Interval Pkts : 0 Mismatched Addr List Pkts : 0
Mismatched IP TTL Pkts : 0 Mismatched Auth Type Pkts : 0