EasyManua.ls Logo

HP ProCurve 3500yl - Release K.11.67; Release K.11.68

HP ProCurve 3500yl
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
159
Software Fixes in Release K.11.12 - K.13.49
Release K.11.67
Web/RADIUS (PR_1000368520) — Web Authentication doesn't authenticate clients due
to a failure to send RADIUS requests to the configured server.
WebUI (PR_1000371598) — Unable to Access Stack Members through Commander
WebUI. Use of the WebUI "stack access" drop-down list on the stacking commander returns
a "Page not found" error.
Release K.11.67
The following problems were resolved in release K.11.67 (not a general release)
MSTP (PR_1000385573) — MSTP instability when root switch priority is changed. This
causes other switches with better priority to assert themselves as root, thus causing a root
war to occur.
Release K.11.68
Software never released.
CLI/LLDP (PR_1000377191) — Output from the CLI command, "show lldp info
remote-device <port>" shows a blank field for the chassis ID.
Crash (PR_1000390591) — Software exception at sflow.c:3903 after re-starting sflow
sampling. Switch may crash with a message similar to:
Software exception at sflow.c:3903 -- in 'mSnmpEvt',
task ID = 0x8248e90-> ASSERT: failed
DHCP (PR_1000386886) — DHCP-relay uses an inconsistent address when the VLAN is
multinetted. This fix forces the lowest IP address to be used for DHCP.
Enhancement (PR_1000388709) — SFlow does not accommodate bursty traffic.
ROM update (PR_1000390486) — ROM update to version K.11.03, required to support
the upcoming K.12 software update.
Trunking (PR_1000238829) — Trunks numbered trk10 and greater cause the output from
the CLI command "show span" output to be misaligned.

Table of Contents

Related product manuals