EasyManua.ls Logo

HP ProCurve 3500yl - Release K.13.08

HP ProCurve 3500yl
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
188
Software Fixes in Release K.11.12 - K.13.49
Release K.13.08
W 03/11/06 03:18:53 00374 chassis: Ports 25-48 Slave ROM Tombstone:
0x13000601
W 03/11/06 03:18:53 00374 chassis: Ports 25-48: Lost Communications
detected - Heart Beat Lost
I 03/11/06 03:19:00 00375 chassis: Ports 25-48 Downloading
I 03/11/06 03:19:01 00376 chassis: Ports 25-48 Download Complete
I 03/11/06 03:19:15 00422 chassis: Ports 25-48 Ready
ARP Protect/Config (PR_0000001549) The VLAN ID range for the ARP protection
configuration is changed from its original value after updating from K.12.xx to K.13.03.
Crash/Config Migration (PR_0000001607) If VRRP is configured on a switch and the
switch is rolled back from K.13.xx to K.12.xx and then updated to K.13.xx again, the switch
may get into a continuous crash/reboot state. The crash messages may be similar to the
following.
NMI event SW:IP=0x0015e960 MSR:0x00029210 LR:0x00229944
Task='mSess1' Task ID=x86fe5f0 cr: 0x24022488 sp:0x086fd960
xer:0x00000000
NMI event SW:IP=0x0083670c MSR:0x00029210 LR:0x007c4e1c
Task='mIpCtrl' Task ID0x8c0ed90 cr: 0x24004084 sp:0x08c0e4c0
xer:0x20000000
Software exception at vrrp_common_lib.c:279 -- in 'swInitTask',
task ID = 0x917630
The fix involves partially removing some of the VRRP configuration and then generating an Event
Log message similar to:
E 07/14/06 10:14:15 00227 mgr: Partial config deleted for
subsystem=vrrp;see release notes.
Release K.13.08
The following problems were resolved in release K.13.08.
SNMP/Config (PR_0000001672) The snmp-server configuration may change during the
migration from K.12.xx to K.13.03.
Web/MAC Authentication (PR_1000793226) Web or MAC authentication to the
switch by a client that moves from one port to another may either fail or cause the switch to
crash with a message similar to the following.
Program exception vector - Task='mWebAuth' Task ID=0x83bc390

Table of Contents

Related product manuals