206
Software Fixes in Release K.11.12 - K.13.49
Release K.13.47
Release K.13.47
The following problems were resolved in release K.13.47. (Never released.)
■ OSPF ECMP (PR_0000004798) — Some IP subnets which are multiple hops away are not
reachable from certain clients despite the presence of the target subnet in the switch routing
table. Workaround: Initiate a traceroute from the switch to the client PC.
Release K.13.48
The following problems were resolved in release K.13.48. (Never released.)
■ DHCP Relay (PR_0000013661/000008196) — After adding a second IP Address to a
VLAN with IP Helper configured, the switch Relay Agent IP Address gets corrupted such that
the DHCP server does not recognize the request as part of a configured scope, and drops the
request. Workaround: Save the configuration and reload the switch after configuration of an
IP Helper address and DHCP Relay.
■ Module/Fabric Errors (PR_0000012418) — Switches running system software version
K.12.45 or higher may see one or more of the following errors in the event log, potentially
causing false self-test failures.
W 12/02/08 14:24:59 00374 chassis: HSL Non-Fatal F0: SLOT D HSL
#11 - HSL status FF002000
W 12/02/08 14:25:25 00374 chassis: Slot D: Msg loss detected - no
ack for seq # 37
W 12/02/08 14:25:38 00374 chassis: Slot D Slave ROM Tombstone:
0x13000601
W 12/02/08 14:25:38 00374 chassis: Slot D: Lost Communications
detected – Source Message System(59)
W 12/02/08 14:25:58 00374 chassis: HSL Non-Fatal F0: SLOT D HSL #11
- HSL status FF002000 W 12/02/08 14:26:17 00374 chassis: Slot D: Msg
loss detected - no ack for seq # 40
W 12/02/08 14:27:28 00374 chassis: Slot D Failed to
boot-timeout- (SELFTEST)
■ OSPF ECMP (PR_0000013777) — When the switch is acting as an ECMP router with
multiple next hops available, sometimes it fails to route packets received on a local VLAN
to hosts that are reachable via ECMP routes. The result is intermittent connectivity to hosts
on the other side of ECMP routes.
■ Boot ROM (PR_0000014318) — This build introduces the new K.12.14 boot ROM, a
prerequisite for future updates. Please do not interrupt power to the switch during the
software/boot ROM update!
To Next Page
Loading...
