152
Software Fixes in Release K.11.12 - K.13.49
Release K.11.36
■ MIB (PR_1000307831) — The MIB value for ipAddrTable is not populated.
■ RIP (PR_1000331536) — RIP does not send a route poison update in response to a failed
route.
■ Show tech (PR_1000294072) — Show Tech statistics displays incorrect port names for
fixed ports.
Release K.11.36
The following problems were resolved in release K.11.36 (never released)
■ 10-GbE (PR_1000346107) — The guaranteed minimum bandwidth feature is not working
on 10-GbE ports.
Release K.11.37
The following problems were resolved in release K.11.37 (not a general release)
■ Login (PR_1000347300) — Login failures do not result in an "Invalid Password" response.
Release K.11.38
The following problems were resolved in release K.11.38 (never released)
■ 10-GbE (PR_1000346107) — The Guaranteed minimum bandwidth feature does not work
on 10-GbE ports.
■ CLI (PR_1000305349) — The command, no ip router-id, does not work. Once a router-ID
is set, there is no way to remove it.
■ QoS (PR_1000346708) — IP-Precedence does not set the correct priority if all TOS bits
are set to 1.
Release K.11.39
The following problems were resolved in release K.11.39 (never released)
■ Crash (PR_1000344998) — The switch may crash with a message similar to
Software exception at sme.c:103 -- in 'mSess1', task ID = 0x8e05520
-> ASSERT: failed
■ Crash (PR_1000351693) — The switch may crash with a message similar to
To Next Page
Loading...
