113
Enhancements
Release K.13.19 Enhancements
Figure 11. Example of the Logging Command with a Priority Description
Note
A notification is sent to the SNMP agent if there are any changes to the syslog parameters either
through the CLI or with SNMP.
Command Differences for the ProCurve Series 2600/2800/3400cl/6400cl
Switches
CLI Commands
The ProCurve series 2600/2800/3400cl/6400cl switches do not have the following CLI logging
commands:
• logging severity
• logging system-module
SNMP Commands
The ProCurve series 2600/2800/3400cl/6400cl switches do not support the following SNMP objects:
• hpicfSyslogPrioritySeverity
• hpicfSyslogSystemModule
Operating Notes
• Duplicate IP addresses are not stored in the list of syslog servers.
Syntax: logging priority-descr <text_string>
no logging priority-descr
Provides a user-friendly description for the combined filter values of severity and
system module. If no description is entered, this is blank. If <text_string> contains
white space, use quotes around the string. Use the no form of the command to remove
the description.
Limit: 255 characters
ProCurve(config)# logging priority-descr severe-pri
To Next Page
Loading...
