HP ProCurve 3500yl - Page 139

128
Enhancements
Release K.13.19 Enhancements
Commands for Using Custom Web Authentication Pages
aaa port-access web-based ewa-server
Figure 29. Adding Web Servers with the aaa port-access web-based ews-server Command
Figure 31. Removing a Web Server with the aaa port-access web-based ews-server Command
Command Page
[no] aaa port-access web-based <port-list > ewa-server 128
show port-access web-based config <port-list > 129
Syntax: aaa port-access web-based [ewa-server <ipv4-addr | hostname> [<page-path>]]
Configures a connection with the Web server at the specified IPv4 address
(ipv4-addr) or host name (ipv4-addr) on which customized login Web pages used
for Web Authentication are stored. A maximum of 3 Web servers may be config-
ured on the switch.
The optional <page-path> parameter defines the directory path on the server where
all customized login Web pages (graphics, HTML frames, and HTML files) are
stored. (Default: The default <page-path> value is “/” for root directory. If the Web
server is also used for other purposes, you may wish to group the HTML files in
their own directory, for example in “/EWA/”)
ProCurve Switch (config)# aaa port-access web-based 47 ewa-server 10.0.12.179
/EWA
ProCurve Switch (config)# aaa port-access web-based 47 ewa-server 10.0.12.180
/EWA
ProCurve Switch (config)#
ProCurve Switch (config)# aaa port-access web-based 47 ewa-server 10.0.12.181
ProCurve Switch (config)#