HP ProDesk 680 G3 MT User Manual

6. Release the retention clip (1) that secures the 3.5-inch hard drive to the drive cage.
7. Lift the right side of the 3.5-inch hard drive (2) until it releases from the slots in the drive cage.
8. Slide the 3.5-inch hard drive to the right as far as it will go, and then remove the 3.5-inch hard drive (3).
Reverse this procedure to install the hard drives.
32 Chapter 4 Removal and replacement procedures

HP ProDesk 680 G3 MT Specifications

General

Brand	HP
Model	ProDesk 680 G3 MT
Category	Desktop
Language	English