HP ProLiant DL160 Gen9 User Manual

HP ProLiant DL160 Gen9 Server
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 775786-002
December 2014
Edition: 2

HP ProLiant DL160 Gen9 Specifications

General

Max Processors	2
Memory Slots	16 DIMM slots
Processor	Intel Xeon E5-2600 v3/v4
Storage	Up to 4 LFF or 8 SFF drives
RAID	HP Dynamic Smart Array B140i Controller (default), Optional HP Smart Array controllers
Network	4 x 1GbE
Expansion Slots	3 x PCIe 3.0 slots
Power Supply	550W or 900W
Management	iLO 4
Form Factor	1U Rack
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware

Summary

Component Identification

Operations

Powering the Server On and Off

Step-by-step procedures for powering the server up, down, and into standby mode.

Setup

Environment, Power, and Grounding

Installing the Server into the Rack

Step-by-step guide for securely installing the server into a rack.

Hardware Options Installation

Drive Installation

Memory Installation and Configuration

Information on supported DIMM types, speeds, and memory protection modes.

Processor Installation

Detailed steps for installing or replacing server processors and heatsinks.

Cabling

Software and Configuration Utilities

HP iLO and System Health

Firmware and Driver Updates

Methods for updating system firmware, BIOS, and device drivers.

HP UEFI System Utilities

Troubleshooting

Troubleshooting Resources

Electrostatic Discharge Precautions

Preventing Electrostatic Discharge

Guidelines to avoid damaging static discharge to sensitive components.

Grounding Methods