HP ProLiant DL180 Gen9 - Page 101

Component identification 101
• Two-slot PCI riser cage assembly: Install in either the primary or secondary PCIe riser board connector.
Item Form factor Slot description
1
Full-height, full-length PCIe3 x16 (16, 8, 4, 1)
2
Full-height, half-length PCIe3 x8 (8, 4, 1)
• Three-slot PCI riser cage assembly: Install in either the primary or secondary PCIe riser board connector.
Item Form factor Slot description
1
Full-height, full-length PCIe3 x8 (8, 4, 1)
2
Full-height, half-length PCIe3 x8 (8, 4, 1)
3
Full-height, half-length PCIe3 x8 (8, 4, 1)
• FlexibleLOM riser cage assembly: Install in the secondary PCIe riser board connector.
Item Form factor Slot description
1
Full-height, full-length PCIe3 x8 (8, 4, 1)
2
Full-height, half-length PCIe3 x8 (8, 4, 1)