Removal and replacement procedures 40
11. Remove the non-hot-plug drive cable assembly.
o 4-bay LFF non-hot-plug drive cable assembly removal
o 8-bay LFF non-hot-plug drive cable assembly removal
To replace the component, reverse the removal procedure.
4-bay and 8-bay LFF hot-plug drive backplanes
This procedure shows the removal of the 4-bay and 8-bay LFF drive backplanes from a 12-bay LFF hot-plug
drive configuration.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To Next Page
Loading...
