Operations 18
3.
Use a screwdriver to remove the captive screw.
4. Slide the access panel back and lift it off the server.
Remove the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser board assembly.
1. Power down the server (on page 16).
2. Extend the server from the rack (on page 17).
3. Remove the access panel (on page 17).
4. Disconnect any internal or external cables connected to any existing expansion boards.
5. Remove the PCI riser board assembly.
Install the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser board assembly.
To Next Page
Loading...
