Hardware options installation 32
4.
Install the hard drive.
Optical drive assembly option
NOTE: The server supports slimline optical devices, including CD-ROM, DVD-ROM, and DVD-RW.
1. Power down the server (on page 16).
2. Remove the server from the rack (on page 17).
3. Remove the access panel (on page 17).
4. Remove the fan assembly (on page 19).
5. Remove the BBWC holder ("Remove the BBWC battery holder" on page 21) and optional battery
with cable, if installed.
6. Disconnect the front panel LED board cable.
7. Disconnect cables from any devices installed in the media cage, if necessary.
To Next Page
Loading...
