Hardware options installation 44
13.
Connect the video cable.
14. Connect all cables to other devices installed in the media cage, if necessary.
15. Connect the front panel LED board cable.
16. Install the BBWC holder and optional battery with attached cable, if applicable.
17. Install the fan assembly (on page 20).
18. Install the access panel.
19. Install the server into the rack.
Expansion board
1. Power down the server (on page 16).
2. Remove the server from the rack (on page 17).
3. Remove the access panel (on page 17).
4. Disconnect any internal or external cables connected to any existing expansion boards.
To Next Page
Loading...
