HP ProLiant DL380 - Rack Management Systems; Standard Square-Hole Rack Rails; Round-Hole Rack Solution; Telco Rack Solution

HP ProLiant DL380 Generation 3 Server High-Density Deployment
22
Rack
Management
Systems
HP recommends using the standard rack rails and cable management solution. The rack
management solution installed in the rack determines the position of the PDUs installed in the rack
side panels. To determine the best rack management solution, consider the service and upgrade
demands of the servers deployed in the rack.
Standard Square-
Hole Rack Rails
The server ships with a standard fast deployment fixed rack rail kit designed for 24- to 36-inch deep
square-hole racks. The sliding rails and cable management solution allows the server to be extended
fully from the rack and temporarily locked in place for servicing, without removing the cables from
the server. This solution also provides better access to the rear cabling connections. For detailed
instructions on installing standard rack rails, refer to the HP ProLiant DL380 Generation 3 Server User
Guide and to the HP ProLiant DL380 Generation 3 Server Quick Setup Poster.
Round-Hole Rack
Solution
The server design supports deployment in round-hole rack cabinets. This Round-Hole Rack Rail kit
includes variable length rack rails that are compatible with round-hole racks 610 mm (21 in) to
740 mm (29.13 in) deep.
Telco Rack
Solution
The server design supports deployment in telco racks. If you are installing the server into a telco rack,
order the appropriate option kit at www.racksolutions.com/hp.