HP ProLiant DL380 Generation 3 Server h-Density Deployment
4
Hig
Symbols and
Warnings
Symbols in Text
The following symbols might be found in the text of this guide.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific
instructions.
Note: Text set off in this manner presents commentary, sidelights, or interesting points of
information.
Symbols on
Equipment
The following symbols are located on equipment in areas where hazardous conditions
might exist.
This symbol in conjunction with any of the following symbols indicates the
presence of a potential hazard. The potential for injury exists if warnings
are not observed. Consult the documentation included with the server for
specific details.
This symbol indicates the presence of hazardous energy circuits or electric
shock hazards. Refer all service to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do
not open this enclosure. Refer all maintenance, upgrades, and service to
qualified personnel.
This symbol indicates the presence of electric shock hazards. The area
contains no user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do
not open this enclosure.
This symbol on an RJ-45 receptacle indicates a Network Interface
Connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into
this receptacle.
This symbol indicates the presence of a hot surface or hot component. If
this surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
To Next Page
Loading...
