HP ProLiant DL380 - Appendix A: Reference Information and Glossary; References; Glossary

HP ProLiant DL380 Generation 3 Server High-Density Deployment
30
Appendix A:
Reference
Information
and Glossary
References
Sources referenced in this paper are listed in Table 13.
Table 13. Sources of Information
Topic Where to Find
Information focal point for the server www.hp.com/products/servers/platforms
Specifications, options, and a list of
other HP products and options
compatible with the server
HP ProLiant DL380 Generation 3 Server QuickSpecs at
www.hp.com/products/servers/platforms
Installation and service guidelines for
the server
HP ProLiant DL380 Generation 3 Server User Guide, P/N 303130-001
HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide,
P/N
291916-001
www.hp.com/products/servers/platforms
Glossary
1U – A rack unit (1U) is 4.45 cm (1.75 in) in vertical dimension. The height of a device (also known
as form factor) can be expressed in rack units (U). The ProLiant DL380 Generation 3 server is a 2U
server.
1U Integrated Keyboard/Mouse/TFT – The TFT5600 RKM (rack-mount keyboard and monitor)
is a 1U integrated keyboard and monitor. Its full 15-inch TFT active matrix display provides flicker-
free, quality display at viewing angles up to 120 degrees horizontally and 105 degrees vertically.
Flat Panel Display (FPD) – An HP TFT5010R (15-inch) flat panel monitor provides a large image
size and exceptional screen performance in a space-saving 2U size that enables the monitor to be
neatly tucked away when not in use.
High Voltage – AC line voltage of 200 V to 240 V. With higher voltage levels, a server can use a
lower current and still meet its power requirements. HP recommends using a high-voltage source to
support high-volume deployments of ProLiant DL380 Generation 3 servers in a rack.
In-Rack Keyboard – The 1U rack keyboard drawer and the internal keyboard with trackball are
designed to work together to save room in space-constrained, rack-mount environments. The 1U
keyboard drawer requires only half the rack depth and provides enough space behind it to mount an
HP Server Console switch.
Integrated Lights-Out (iLO) – a standard component of selected ProLiant servers that provides
server health and remote server manageability. The iLO subsystem includes an intelligent
microprocessor, secure memory, and a dedicated network interface. This design makes iLO
independent of the host server and its operating system. Integrated Lights-Out provides remote access
to any authorized network client, sends alerts, and provides other server management functions.
Keyboard/Video/Mouse (KVM) – KVM refers to a keyboard cable, a video cable, a mouse
cable, or a switch. Some HP parts lists might refer to KVM switches as Server Console Switches.