HP ProLiant DL380e - System Options Menu (G7 Servers); Serial Port Options (G7 Servers)

RBSU menu (HP ProLiant G7 servers or server blades) 10
Servers configured using the BIOS Serial Console display a command prompt screen.
The CLI mode of RBSU ("CLI Mode Selection" on page 140) is a command-prompted interface that
provides equivalent functionality to the menu-based mode.
System Options menu (G7 servers)
The System Options menu enables basic I/O server configuration with the following options:
• Serial Port Options (G7 servers) (on page 10)
• Embedded NICs (G7 servers) (on page 12)
• NIC Personality Options (G7 servers) (on page 14)
• Advanced Memory Protection (G7 servers) (on page 15)
• USB Options (G7 servers) (on page 17)
• Processor Options (G7 servers) (on page 20)
• NUMLOCK Power-On State (G7 servers) (on page 27)
IMPORTANT: Menu options may differ from those in this document, depending on specific
server options.
Serial Port Options (G7 servers)
• Embedded Serial Port (G7 servers) (on page 11)
• Virtual Serial Port (G7 servers) (on page 12)