RBSU menu (HP ProLiant G6 and earlier servers or server blades) 126
• Virtual Install Disk (on page 128)
• Secondary IDE Channel Support (on page 128)
• BIOS Enhanced RAID (on page 129)
• Node Interleaving (on page 129)
• Serial Number (on page 129)
• Product ID (on page 129)
• Drive Write Cache (on page 129)
• SATA Software RAID (on page 129)
• Optional PCI-X Riser Fan Monitoring (on page 129)
• Processor Options (on page 130)
• Power Supply Requirements Override (on page 131)
• Embedded VGA Control (on page 131)
IMPORTANT: Menu options may differ from those in this document, depending on specific
server options.
Multi-Processor Specification (MPS) Table Mode
The MPS Table Mode option is automatically set, based on the OS selected, and is used for interrupt
routing.
IMPORTANT: This setting is pre-selected. You can override the default setting at this menu, but
successful OS operation is dependent upon the correct (default) setting.
To Next Page
Loading...
