HP ProLiant DL380e - Boot Configuration (G7 Servers); Standard Boot Order (IPL) (G7 Servers); Boot Controller Order (G7 Servers)

RBSU menu (HP ProLiant G7 servers or server blades) 48
Standard boot order (IPL) (G7 servers)
The Standard Boot Order (IPL) option configures the Initial IPL device and controls the search order the
server uses to look for a bootable device.
NOTE: If you enable or disable a device, restart the server. Changes do not take effect until
after reboot.
Boot Controller Order (G7 servers)
The Boot Controller Order option selects which of the installed mass storage devices is used as the
primary boot controller. The server attempts to boot to the OS located on the primary boot controller.
The primary boot controller is set to controller 1.
NOTE: Changes made to the Boot Controller Order in the ORCA Utility are reflected in this
menu.