RBSU menu (HP ProLiant G6 and earlier servers or server blades) 128
User Default Options
User Default Options enable definition of default configuration settings. When the system is configured
with default settings and saved, the new default settings override factory defaults.
NMI Debug Button
The NMI Debug Button option is a simple toggle setting that allows you to enable debug functionality
when the system has experienced a software lock-up. The NMI Debug Button generates an NMI to allow
the use of the OS debugger.
WARNING: When enabled, pressing the NMI Debug Button on the system board during
normal OS operation generates a Blue-Screen Trap, ABEND, or Panic, and halts the system.
Virtual Install Disk
The virtual install disk is a holding place within the system ROM that contains embedded boot drivers
(such as SCSI or RAID controller drivers) that may be necessary to complete the operating system
installation. Typically, boot drivers that are placed in the virtual install disk are either not included as part
of the operating system media or are updated for new controllers. Supported operating systems
automatically find these drivers, eliminating the need for user intervention. To further optimize the system,
HP recommends updating these boot drivers to the latest version after the OS install.
Secondary IDE Channel Support
The Secondary IDE Channel Support option is a toggle setting that enables or disables the secondary IDE
channel. When enabled, an additional IDE device can be connected to the secondary IDE channel.
To Next Page
Loading...
