RBSU menu (HP ProLiant G6 and earlier servers or server blades) 106
Virtual Serial Port
The Virtual Serial Port option assigns the logical COM Port number and associated default resources used
by the Virtual Serial Port. When enabled, the option provides remote access through the iLO management
controller to BIOS Serial Console.
NOTE: The Virtual Serial Port option requires iLO Firmware version 1.55 or later.
For detailed information about iLO configurations, refer to the HP Integrated Lights-Out User Guide on the
Documentation CD or to the HP website (http://www.hp.com/servers/lights-out
).
To Next Page
Loading...
