HP ProLiant DL380e - System Maintenance CLI Commands & Buffering; System Maintenance CLI Commands; Command Buffering Support

Command Line Interface 144
Command Usage Description
SET TEXT SERVICE
SET TEXT SERVICE
[N|P|G|O] [1|2|3|4]
<string>
Sets service contact text string specified by <X>
<#> to <string> where X can be:
'N': Service Name (28)
'P': Service Phone number (28)
'G': Service Pager number (28)
'O': Service Other (28)
# is the line number.
SHOW TEXT IMD SHOW TEXT IMD Displays current IMD custom text strings.
SET TEXT IMD
SET TEXT IMD [I|M|S]
[1|2|3|4] <string>
Sets IMD Custom text string specified by <X>
<#> to <string> where:
'I': Idle Screen (48)
'M': Custom Menu Item (14)
'S': Custom Menu Screen (56)
# is the line number.
SHOW TEXT POST SHOW TEXT POST Displays current POST custom text strings.
SET TEXT POST SET TEXT POST <string>
Sets POST Custom text to string specified by
<string>.
System Maintenance CLI Commands
Command Usage Description
HELP HELP or HELP <command>
Displays all supported commands or usage
and descriptions of a specific command.
EXIT EXIT Exits menu and continues booting.
RBSU RBSU Executes RBSU (has CLI).
INSPECT INSPECT Executes Inspect Utility (has CLI).
PXE PXE Attempts PXE Boot.
MEMDIAG MEMDIAG
Executes Diagnostics Utility specified.
(Diagnostics Utility has CLI output as well.)
CPUDIAG CPUDIAG
Executes Diagnostics Utility specified.
(Diagnostics Utility has CLI output as well.)
DISKDIAG DISKDIAG
Executes Diagnostics Utility specified.
(Diagnostics Utility has CLI output as well.)
Command Buffering Support
The CLI mode support buffers the previous five commands entered from the command line, accessible
using the up arrow key and the down arrow key.