RBSU menu (HP ProLiant G6 and earlier servers or server blades) 114
Standard Boot Order (IPL)
The Standard Boot Order (IPL) option configures the Initial IPL device and controls the search order the
server uses to look for a bootable device.
NOTE: If you enable or disable a device, restart the server. Changes do not take effect until
after reboot.
Boot Controller Order
The Boot Controller Order option selects which of the installed mass storage devices is used as the
primary boot controller. The server attempts to power up with the OS on this device.
The primary boot controller is set to controller 1.
NOTE: Changes made to the Boot Controller Order in the ORCA Utility are reflected in this
menu.
To Next Page
Loading...
