RBSU menu (HP ProLiant G7 servers or server blades) 84
HP recommends selecting Increased Cooling when storage controllers not manufactured by HP are
connected to the embedded hard drive cage, or if the system is experiencing thermal issues that cannot
be resolved in another manner.
Service Options (G7 servers)
• Serial Number (G7 servers) (on page 84)
• Product ID (G7 servers) (on page 85)
Serial Number (G7 servers)
The Serial Number option enables service personnel to change the serial number. HP recommends that
you do not change this number unless you are replacing a system board. When the Serial Number option
is chosen, the following message appears:
To Next Page
Loading...
