ROM-based enhancements 137
To run the CPU diagnostic test, select CPU Test from the Diagnostics Utility menu.
Boot Disk Diagnostic Test
The boot disk diagnostic test verifies the presence and readiness of a primary boot controller. If a
controller is present and ready, the test checks for a valid operating system boot sector.
To run the Boot Disk diagnostic test, select Boot Disk Test from the Diagnostics Utility menu.
Auto-Configuration Process
The auto-configuration process automatically runs when you boot the server for the first time. During the
power-up sequence, in many cases the system ROM automatically configures the entire system without
needing any intervention. During this process, the ORCA Utility, in most cases, automatically configures
the array with a default setting based on the number of drives connected to the server.
To Next Page
Loading...
