RBSU menu (HP ProLiant G6 and earlier servers or server blades) 113
PCI Devices
The PCI Devices menu displays the configuration settings of the PCI devices installed in the server and
allows you to modify the IRQ. Multiple PCI devices can share an interrupt.
To disable a device, select the device and press the Enter key. A menu is displayed with options to
change the IRQ, as well as to disable the device.
NOTE: Only IRQs that are modified in RBSU retain the change during the next reboot. IRQs
on PCI devices that have not been modified are subject to change during reboot.
IMPORTANT: When the PCI Hot Plug driver is installed on servers with Microsoft®
Windows® 2000 or Windows Server® 2003, disabling a single PCI controller also disables
all controllers on the same PCI bus. To avoid disabling other controllers on the bus, remove
the single PCI controller.
To Next Page
Loading...
