HP ProLiant DL380e - HP ProLiant DL580 G7 and HP ProLiant DL980 G7 Servers

RBSU menu (HP ProLiant G7 servers or server blades) 92
HP recommends that this setting remain at the default of 1066 MHz maximum when using DIMMs not
manufactured by HP.
HP ProLiant DL580 G7 and HP ProLiant DL980 G7 Servers
• HW Prefetcher (G7 servers) (on page 93)
• Adjacent Sector Prefetch (G7 servers) (on page 94)
• Hemisphere Mode (HP ProLiant DL580 G7 Servers) (on page 94)
• Node Interleaving (G7 servers) (on page 96)