HP ProLiant DL385 - Page 72

72 HP ProLiant DL385 Server User Guide
4. Remove the protective cover on the server bezel from the front of the
diskette drive bay.
5. Slide the diskette drive into the diskette drive bay.
6. Tighten the thumbscrew.
7. Secure the diskette drive cable to the diskette drive cable connector on the
SCSI backplane board or SAS backplane board.
8. Install the access panel ("Installing the access panel" on page 39
).
9. Power up the server ("Powering up the server" on page 35
).