NOTE: Creating a deployment setting from the Assisted Installation option is only supported for
Windows installs.
When you open Deployment Settings, you can choose to manage an existing Deployment Settings
profile or create a new one.
Creating a Deployment Settings package
To create a Deployment Settings package:
1. From the Deployment Settings window, select one of the following:
• To create a new, custom Deployment Settings profile or modify an existing Deployment
Settings profile, click Manage.
• To create a new Deployment Settings profile based on one of the provided default profiles,
select one of the templates at the bottom of the page.
2. Navigate through the options in the Deployment Settings windows, entering the appropriate
information.
3. Click Save. When prompted, enter a name and navigate to a USB key on which to save the
Deployment Settings.
IMPORTANT: Deployment Settings package names cannot include spaces.
Using a Deployment Settings package to configure a single server
IMPORTANT:
• Before using a deployment to install an OS, be sure that the drives and arrays are configured.
• Do not interrupt the configuration process.
• Deployment Settings are not compatible with an SD card OS installation.
To use a Deployment Settings package to configure a single server:
1. If you want to use the deployment you just created on the server, click Deploy.
If you want to use a previously created deployment, insert the USB key containing the
deployment:
a. Save the deployment from the USB key to the local server.
b. In the Select a Deployment window, select the deployment from the list and click Deploy.
If the USB key and their stored deployments are not displayed, click Rescan.
38 Performing maintenance
To Next Page
Loading...
