When initially configuring Intelligent Provisioning for use, this screen is displayed in “Step 3:
Registering for Insight Remote Support” (page 10).
Unregistering from Insight Remote Support
The process to unregister from Insight Remote Support depends on whether you used the Insight
Online direct connect or Insight Remote Support central connect registration method.
Unregistering from Insight Online direct connect
Use this procedure to discontinue monitoring of an HP ProLiant server that is registered for Insight
Online direct connect.
1. Navigate to the Perform Maintenance page and select HP Insight Remote Support.
2. Click Unregister.
The following message appears:
This server is not registered.
Unregistering from Insight Remote Support central connect
Use this procedure to discontinue monitoring of an HP ProLiant server that is registered for Insight
Remote Support central connect.
1. Log in to the Insight RS Console.
2. Do one of the following:
• To stop monitoring an HP ProLiant server temporarily, select the server on the
Devices→Device Summary tab in the Insight RS Console, and then select
ACTIONS→DISABLE SELECTED.
NOTE: Unregistering the server directly from Intelligent Provisioning is the same as
temporarily disabling the server in the Insight RS Console.
• To stop monitoring an HP ProLiant server permanently, delete the server from the Insight
RS Console. To delete the server, select it on the Device Summary tab, and then select
ACTIONS→DELETE SELECTED.
3. Navigate to the Perform Maintenance→HP Insight Remote Support page in Intelligent
Provisioning.
Using HP Insight Remote Support 69
To Next Page
Loading...
