1. In the Maintenance window, click iLO.
The iLO Configuration Utility window appears.
2. Click Summary. The following information is displayed:
• iLO Hostname—The DNS name of the iLO subsystem, for example, ilo instead of
ilo.example.com. This name can be used only if DHCP and DNS are configured to connect
to the iLO subsystem name instead of the IP address.
• iLO Firmware Version—The version and date of the installed iLO firmware.
• iLO IP Address—The network IP address of the iLO subsystem
• Server Model—The type of system in which this iLO processor is integrated
• System ROM—The family and version of the active system ROM
You can also view this information on the Overview screen in the iLO web interface. For more
information, see the HP iLO 4 User Guide on the HP website (http://www.hp.com/go/ilo/docs).
NOTE: The rest of the procedures in this section are written with the assumption that you have
selected iLO from the Maintenance window.
Editing iLO Access Settings
Various iLO access settings can be edited from the three tabs on the Access Settings window:
Access Options, Service and IPMI/DCMI.
To edit access settings on the Access Options tab:
50 Performing maintenance
To Next Page
Loading...
