When accessing Intelligent Provisioning, one of the following happens:
• If this is your first time using Intelligent Provisioning, on-screen prompts guide you through
initial configuration and registration tasks. (“Completing initial configuration and registration
tasks” (page 8).)
• If Intelligent Provisioning was previously accessed and the initial configuration and registration
tasks are complete, the Intelligent Provisioning home page is displayed. In the home screen,
select one of the following menus to use Intelligent Provisioning:
◦ Configure and Install menu (“Configuring the server and installing an OS” (page 20))
NOTE: The Configure and Install option is not available for HP ProLiant SL, SE, and XL
Servers.
◦ Perform Maintenance menu (“Performing maintenance” (page 33))
To exit Intelligent Provisioning, reboot the server by clicking the power icon at the top right of the
page.
6 Introduction
To Next Page
Loading...
