1. In the iLO Configuration Utility window, click User Administration. The User Administration
window appears.
2. Click New. The Add User window appears.
3. Enter the user name. The maximum length for a user name is 39 characters. The user name
must use printable characters.
4. Enter the login name. The maximum length for a login name is 39 characters. The login name
must use printable characters.
IMPORTANT: The Login Name cannot be modified, once it is set.
5. Enter the password. The minimum length for a password is set on the Access Settings page.
The maximum length for a password is 39 characters.
6. Re-enter the password to confirm it.
7. Select the appropriate user permission(s) for the user you are adding.
Using iLO Configuration Utility 65
To Next Page
Loading...
