HP ProLiant ML350p Gen8 Maintenance And Service Guide

Removal and replacement procedures 27
Remove the security bezel
Unlock the security bezel, press the latch on the security bezel, and then remove the security bezel.
Remove the tower bezel
This server has a removable bezel that must be unlocked and opened before accessing the hard drives. The
bezel must be kept closed during normal server operations.
1. Using the key provided with the server, unlock the bezel with a clockwise turn.
2. Remove the tower bezel.
Remove the rack bezel
1. If installed, remove the security bezel (on page 27).
2. Power down the server (on page 26).

HP ProLiant ML350p Gen8 Specifications

General

Processor	Intel Xeon E5-2600 series
Maximum Processors	2
Chipset	Intel C600 Series
Memory Type	DDR3 RDIMM or UDIMM
Maximum Memory	768 GB
Memory Slots	24 DIMM slots
RAID Support	HP Smart Array P420i/1GB FBWC
Storage Controller	HP Smart Array P420i/1GB FBWC
Network Controller	HP Ethernet 1Gb 4-port 331FLR Adapter
Form Factor	Tower
Storage	SAS, SATA, SSD
Network	Gigabit Ethernet
Power Supply	460W, 750W, 1200W
Power Supply Options	Redundant Power Supplies
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware