HP R/T3000 G2 User Manual

Maintenance 52
The Advanced Settings screen appears.
5. Select an available USB port number from the COM Port Number drop down menu.
6. Click OK to close the Advanced screen.
7. Click OK to close the Port Settings screen.
8. Verify that the Device Manager screen shows that the USB to serial converter is assigned to COM 1,
and that the other USB device is assigned to a different port.
If the Device Manager screen does not automatically refresh to show the change:
a. Click Action.
The Action Menu appears.
b. Click Scan for hardware changes to refresh the screen and display the changes.

HP R/T3000 G2 Specifications

General

Power Rating	3000VA/2700W
Rack Size	2U
Frequency	50/60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Form Factor	Rack-mountable/Tower
Battery Type	Sealed lead-acid (SLA)
Battery Recharge Time	3 hours
Transfer Time	4-6 ms
Humidity	0-95% non-condensing
Communication Interface	USB, Serial
Warranty	3 years